+353 (0)1 8970030
+353 (0)1 8900895
info@electramed.ie

 

Blood banks

Blood bank refrigerators are our most important products, they are subject to the 93/42/EEC directive (EC medical). In order to guarantee even higher safety and quality of our appliances, Kirsch is certified according to ISO 13485. This certificate proves the conformity to the relevant specifications in the manufacture of medical products. Each BL model offers numerous KIRSCH innovations as standard equipment. Manufactured according to DIN 58371.

BL 100 PRO-ACTIVE

according to DIN 58371, medical product certified according to DIN ISO 13485


This blood bank fridge can be installed normally and also in an undercounter-type installation. Door coupling fittings or decorative frames are available at an extra cost. When the device is being installed as a stand-alone unit we can optionally supply a matching tabletop.

 BL 100 PRO ACTIVE offen klein

Capacity 95 l
Temperature setting +4 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power consumption 92 Watts
Average consumption 0,64 KWh / 24 h
Overall dimensions incl. distance from wall 54 x 54 x 82 (w x d x h in cm)
Interior dimensions 44 x 43 x 47 (w x d x h in cm)
Overall dimensions with door open at 90° 54 x 106 (w x d in cm)
Drawer inner dimensions 37 x 32 x 8,5 (w x d x h in cm)
Loading capacity per drawer 25 kg
Weight 46 kg / 55 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 2·drawers
  • Undercounter type
  • Comfort controller
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Battery for power failure alarm
  • Re-circulation air-cooling
  • Automatic defrosting
  • Meltwater evaporation
  • Easily accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning signal including power failure alarm
  • Minimum/Maximum temperature memory
  • Saftey control device prevents freezing
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Low-noise compressor
  • Lockable door

BL 176 PRO-ACTIVE

according to DIN 58371, medical product certified according to DIN ISO 13485


Our blood bank fridges can be connected to the central control unit via the potential-free contacts which are integrated as standard. A device for data evaluation can be connected to the integrated RS-485 interface.

 BL 176 PRO ACTIVE mittel

Capacity 170 l
Temperature setting +4 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power consumption 120 Watts
Average consumption 1,22 KWh / 24 h
Overall dimensions incl. distance from wall 70 x 77 x 122 (w x d x h in cm)
Interior dimensions 55 x 52 x 60 (w x d x h in cm)
Usable dimensions 53 x 41 x 47 (w x d x h in cm)
Overall dimensions with door open at 90° 70 x 136 (w x d in cm)
Drawer inner dimensions 50 x 34 x 10 (w x d x h in cm)
Loading capacity per drawer 50 kg
Weight 77 kg / 87 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 2 aluminium drawers
  • Comfort controller
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Battery for power failure alarm
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater evaporation
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Optical and acoustical warning including power failure alarm
  • Minimum/Maximum temperature memory
  • Saftey control device prevents freezing
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Lockable door

BL 300 PRO-ACTIVE

according to DIN 58371, medical product certified according to DIN ISO 13485


Our blood bank fridges can be connected to the central control unit via the potential-free contacts which are integrated as standard. A device for data evaluation can be connected to the integrated RS-485 interface.

 BL 300 PRO ACTIVE

Capacity 280
Temperature setting +4 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power consumption 95 Watts
Average consumption 0,63 KWh / 24 h
Overall dimensions incl. distance from wall 67 x 75 x 124 (w x d x h in cm)
Interior dimensions 55 x 51 x 100 (w x d x h in cm)
Overall dimensions with door open at 90° 67 x 133 (w x d in cm)
Drawer inner dimensions of 3 upper drawers 49 x 39 x 10 (w x d x h in cm)
Drawer inner dimensions of 3 of the upper drawer below 51 x 31 x 10 (w x d x h in cm)
Loading capacity per drawer 50 kg
Weight 82 kg / 92 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 4 aluminium drawers
  • Comfort controller
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Battery for power failure alarm
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater evaporation
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Optical and acoustical warning including power failure alarm
  • Minimum/Maximum temperature memory
  • Saftey control device prevents freezing
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Lockable door

BL 520 PRO-ACTIVE

according to DIN 58371


This blood bank fridge features 5 vertically adjustable drawers made of aluminium as standard. A set with 4 adjustable longitudinal and 25 adjustable cross dividers for each drawer is optionally available.

 BL 520 PRO ACTIVE mittel

Capacity 500 l
Temperature setting +4 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power consumption 250 Watts
Average consumption 1,5 KWh / 24 h
Overall dimensions incl. distance from wall 77 x 76 x 195,5 (w x d x h in cm)
Interior dimensions 62 x 56 x 140 (w x d x h in cm)
Overall dimensions with door open at 90° 77 x 144 (w x d in cm)
Drawer inner dimensions 56 x 39 x 10 (w x d x h in cm)
Loading capacity per drawer 50 kg
Weight 139 kg / 160 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 5 aluminium drawers
  • Castors
  • Full extension drawer
  • Comfort controller
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Battery for power failure alarm
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Meltwater evaporation
  • Drawers height-adjustable
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Minimum/Maximum temperature memory
  • Optical and acoustical warning including power failure alarm
  • Saftey control device prevents freezing
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Low-noise compressor
  • Lockable door

BL 720 PRO-ACTIVE

according to DIN 58371


In most of our blood bank fridge an LED batten light fitting can be installed at an extra cost which guarantees that the interior is well-lit. We are also able to supply lockable glass doors, so you can look inside without having to open the door.

 BL 720 PRO ACTIVE mittel

Capacity 700 l
Temperature setting +4 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power consumption 250 Watts
Average consumption 1,56 KWh / 24 h
Overall dimensions incl. distance from wall 77 x 98 x 195,5 (w x d x h in cm)
Interior dimensions 62 x 77 x 140 (w x d x h in cm)
Overall dimensions with door open at 90° 77 x 166 (w x d in cm)
Drawer inner dimensions 56 x 60 x 10 (w x d x h in cm)
Loading capacity per drawer 50 kg
Weight 171 kg / 196 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 5 aluminium drawers
  • Castors
  • Comfort controller
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Battery for power failure alarm
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Meltwater evaporation
  • Drawers height-adjustable
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Minimum/Maximum temperature memory
  • Optical and acoustical warning including power failure alarm
  • Saftey control device prevents freezing
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Lockable door

Plasma freezers

BL models are our top products. Each blood plasma freezer is particularly highly insulated and offers numerous KIRSCH innovations as standard equipment. To ensure the highest possible safety and quality of our blood equipment, Kirsch is certified according to ISO 13485. This certification proves compliance with the relevant regulations for the manufacture of medical products.
Manufactured according to DIN 58375.

Standard equipment:

  • DIN 58375 compliant
  • Aluminium / stainless steel drawers
  • Comfort controller
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Meltwater evaporation
  • Height-adjustable drawers*
  • Easily accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/Maximum temperature memory
  • RS-485 interface for computer-based temperature documentation
  • Potential free contact for alarm transmission.

*Except FROSTER-BL-178, FROSTER-BL-180 and FROSTER-BL-650.

Built According to· DIN 58375 Regulation

A re-circulating air cooling system is integrated as standard and reduces the physically induced temperature drop and enables an almost constant temperature to be maintained in the freezers.

Blood plasma freezers with -32 °C and -40 °C are available for plasma storage. The temperature is maintained automatically by an electronic, microprocessor-controlled temperature regulator, even in the event of changing ambient temperatures. Rapid defrosting with thermal and temporal monitoring takes place automatically. The required plasma storage temperature is maintained thanks to the reversing of the refrigerant circuit.

The standard equipment features of KIRSCH blood plasma freezers include an electronic switching, monitoring and warning device, a minimum/maximum temperature memory, an RS485 interface and potential-free contact for connection to the central control technology.

FROSTER BL 178 PRO-ACTIVE

according to DIN 58375


All KIRSCH Blood Plasma Freezers are fitted with an automatic rapid defrosting system. The defrosting process is thermally monitored and temporarily limited. This prevents freezing of the interior and the temperature of the appliance’s contents is being kept constant in accordance with applicable regulations.

 Froster BL 178 PRO ACTIVE mittel

Capacity 170 l
Temperature setting (approx.) -32°C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 500 Watt
Average consumption 4,88 KWh / 24 h
Overall dimensions incl. distance from wall 70 x 77 x 122 (w x d x h in cm)
Interior dimensions 55 x 52 x 60 (w x d x h in cm)
Overall dimensions with door open at 90° 70 x 136 (w x d in cm)
Drawer inner dimensions 50 x 34 x 10 (w x d x h in cm)
Max. loading capacity per drawer 50 kg
Weight 92 kg / 105 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 3 aluminium drawers
  • Comfort controller
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Meltwater evaporation
  • Easily accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/Maximum temperature memory
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER BL 180 PRO-ACTIVE

according to DIN 58375


All KIRSCH Blood Plasma Freezers are fitted with an automatic rapid defrosting system. The defrosting process is thermally monitored and temporarily limited. This prevents freezing of the interior and the temperature of the appliance’s contents is being kept constant in accordance with applicable regulations.

 Froster BL 180 PRO ACTIVE mittel

Capacity 170 l
Temperature setting (approx.) -41°C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 453 Watt
Average consumption 6,54 KWh / 24 h
Overall dimensions incl. distance from wall 70 x 77 x 122 (w x d x h in cm)
Interior dimensions 55 x 52 x 60 (w x d x h in cm)
Overall dimensions with door open at 90° 70 x 136 (w x d in cm)
Drawer inner dimensions 50 x 32 x 10 (w x d x h in cm)
Max. loading capacity per drawer 50 kg
Weight 100 kg / 110 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 3 aluminium drawers
  • Comfort controller
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Meltwater evaporation
  • Easily accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/Maximum temperature memory
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER BL 330 PRO-ACTIVE

according to DIN 58375


This model features 4 vertically adjustable drawers made of aluminium which rest on telescopic runners. Drawers made of stainless steel are optionally available. We also supply dividers for a neatly and clearly arranged storage of the goods for both types of drawers.

 Froster BL 330 PRO ACTIVE mittel

Capacity 300 l
Temperature setting (approx.) -32°C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 550 Watt
Average consumption 6,59 KWh / 24 h
Overall dimensions incl. distance from wall 74 x 78 x 159 (w x d x h in cm)
Interior dimensions 59 x 52 x 95 (w x d x h in cm)
Overall dimensions with door open at 90° 74 x 142 (w x d in cm)
Drawer inner dimensions 50 x 37 x 10 (w x d x h in cm)
Max. loading capacity per drawer 50 kg
Weight 120 kg / 135 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 4 aluminium drawers
  • Comfort controller
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Meltwater evaporation
  • Easily accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/Maximum temperature memory
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER BL 530 PRO-ACTIVE

according to DIN 58375


For all blood plasma freezers a PC-Kit is available for temperature evaluation, monitoring and documentation. Monitoring can also be done with the KIRSCH-DATANET Software-package. You find more information on this software in the corresponding description "KIRSCH-PC-KIT".

 Blutplasma Froster BL 530 PRO ACTIVE mittel

Capacity 500 l
Temperature setting (approx.) -32°C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 740 Watt
Average consumption 10,81 KWh / 24 h
Overall dimensions incl. distance from wall 77 x 76 x 195,5 (w x d x h in cm)
Interior dimensions 62 x 56 x 140 (w x d x h in cm)
Overall dimensions with door open at 90° 77 x 144 (w x d in cm)
Drawer inner dimensions 56 x 39 x 10 (w x d x h in cm)
Max. loading capacity per drawer 50 kg
Weight 161 kg / 183 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 5 aluminium drawers
  • Castors
  • Full extension drawer
  • Comfort controller
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Meltwater evaporation
  • Height-adjustable drawers
  • Easily accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/maximum temperature memo
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER BL 650 PRO-ACTIVE

according to DIN 58375


Storage temperature of this freezer is -41°C. A two-stage refrigeration machine generates the necessary cooling so that this temperature is kept constant. This enables operation of the freezer in ambient temperatures of up to +32°C.

 Froster BL 650 PRO ACTIVE mittel

Capacity 650 l
Temperature setting (approx.) -41°C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 990 Watt
Average consumption 14,32 KWh / 24 h
Overall dimensions incl. distance from wall 83 x 102 x 197 (w x d x h in cm)
Interior dimensions 62 x 76 x 131 (w x d x h in cm)
Overall dimensions with door open at 90° 86 x 177 (w x d in cm)
Drawer inner dimensions, upper drawers 59 x 56 x 22 (w x d x h in cm)
Drawer inner dimensions, 4 drawers below 59 x 62 x 22
Max. loading capacity per drawer 50 kg
Weight 220 kg / 260 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 5 stainless steel drawers
  • Comfort controller
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Meltwater evaporation
  • Easily accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/Maximum temperature memory
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER BL 730 PRO-ACTIVE

according to DIN 58375


Selected models can be fitted with a water-cooled refrigeration machine on request. The generated heat gets derived into a cold water cycle, which is already installed in the device. This provides thermal relief in the installation room.

 Froster BL 730 PRO ACTIVE mittel

Capacity 700 l
Temperature setting (approx.) -32°C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 790 Watt
Average consumption 11,1 KWh / 24 h
Overall dimensions incl. distance from wall 77 x 98 x 195,5 (w x d x h in cm)
Interior dimensions 62 x 77 x 140 (w x d x h in cm)
Overall dimensions with door open at 90° 77 x 166 (w x d in cm)
Drawer inner dimensions 56 x 60 x 10 (w x d x h in cm)
Max. loading capacity per drawer 50 kg
Weight 202 kg / 237 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 5 aluminium drawers
  • Castors
  • Comfort controller
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Meltwater evaporation
  • Easily accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/Maximum temperature memory
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

 

Blood banks

All KIRSCH Blood Bank Refrigerators offer you the best possible variant for the storage of your banked blood. All refrigerators are made of a robust housing, thick insulation, easy-to-maintain interior container, forced-air cooling, automatic defrosting, etc.
KIRSCH BLOOD BANK REFRIGERATORS ACCORDING TO DIN 58371
KIRSCH blood bank refrigerators are our top products. Each blood bank fridge features numerous innovations as standard equipment. Compliant with DIN 58371 standard.
Requirements include: lockable door, operating temperature between +3 °C and +5 °C with reference measurement of the model series, acoustic and optical warning in case of temperature deviations and power failure, safety features preventing temperatures below freezing, potential-free contact for remote warning, inside temperature can be monitored etc.

BL-100

The blood bank fridge BL-100 can be installed normally and also in an undercounter-type installation. Door coupling fittings or decorative frames are available at an extra cost. When the device is being installed as a stand-alone unit we can optionally supply a matching tabletop.

 BL 100

Capacity 95 l
Temperature setting +4 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power consumtion 160 Watts
Normal consumption 0,85 KW / 24 h
Overall dimensions incl. distance from wall 54 x 53,5 x 82 (w x d x h in cm)
Interior dimensions 44 x 43 x 47 (w x d x h in cm)
Usable dimensions 42 x 38 x 37 (w x d x h in cm)
Overall dimensions with door opened at 90° 54 x 106 (w x d in cm)
Drawer inner dimensions 37 x 32 x 10 (w x d x h in cm)
Loading capacity per drawer 25 kg
Weight 46 kg / 50 kg (net / gross)

Read more...

  • 2·drawers
  • Undercounter type
  • Comfort controller
  • Micro-processor controlled
  • temperature and thawing
  • regulation to maximize
  • temperature stability
  • Battery for power failure alarm
  • Re-circulation air-cooling
  • Automatic defrosting
  • Melt water evaporation
  • Easy accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning signal including power failure alarm
  • Minimum/Maximum temperature memory
  • Saftey control device prevents freezing
  • Potential free contact and interface RS485
  • Low-noise compressor
  • Lockable door

BL-176

Our blood bank fridges can be connected to the central control unit via the potential-free contacts which are integrated as standard. A device for data evaluation can be connected to the integrated RS-485 interface.

 BL 176

Capacity 170 l
Temperature setting +4 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power consumtion 155 Watts
Normal consumtion 1,4 KW / 24 h
Overall dimensions incl. distance from wall 70 x 77 x 122 (w x d x h in cm)
Interior dimensions 55 x 52 x 60 (w x d x h in cm)
Usable dimensions 53 x 41 x 47 (w x d x h in cm)
Overall dimensions with door open at 90° 70 x 136 (w x d in cm)
Drawer inner dimensions 50 x 34 x 10 (w x d x h in cm)
Loading capacity per drawer 50 kg
Weight 79 kg / 89 kg (net / gross)

Read more...

  • 2 aluminium drawers
  • Comfort controller
  • Micro-processor controlled
  • temperature and thawing
  • regulation to maximize
  • temperature stability
  • Battery for power failure alarm
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Melt water evaporation
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Optical and acoustical warning including power failure alarm
  • Minimum/Maximum temperature memory
  • Saftey control device prevents freezing
  • Potential free contact and interface RS-485
  • Lockable door

BL-300

The blood bank refrigerator BL-300 has a door handle which features a mechanism for easy opening. If the refrigerator is used in hygienically demanding areas melt water trays for manual emptying are available for all blood bank refrigerators.

 BL 300

Capacity 280 l
Temperature setting +4 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power consumtion 155 Watts
Normal consumption 1,5 KW / 24 h
Overall dimensions incl. distance from wall 67 x 70 x 124 (w x d x h in cm)
Interior dimensions 55 x 51 x 100 (w x d x h in cm)
Usable dimensions 53 x 46 x 90 (w x d x h in cm)
Overall dimensions with door open at 90° 67 x 128 (w x d in cm)
Drawer inner dimensions of 3 upper drawers 49 x 39 x 10 (w x d x h in cm)
Drawer inner dimensions of the upper drawer below 51 x 31 x 10 (w x d x h in cm)
Loading capacity per drawer 50 kg
Weight 82 kg / 92 kg (net / gross)

Read more...

  • 4·aluminium drawers
  • Comfort controller
  • Micro-processor controlled
  • temperature and thawing
  • regulation to maximize
  • temperature stability
  • Battery for power failure alarm
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Melt water evaporation
  • Drawers height-adjustable
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Minimum/Maximum temperature memory
  • Optical and acoustical warning including power failure alarm
  • Saftey control device prevents freezing
  • Potential free contact and interface RS-485
  • Lockable door

BL-520

The blood bank fridge BL-520 features 5 vertically adjustable drawers made of aluminium as standard. A set with 4 adjustable longitudinal and 25 adjustable cross dividers for each drawer is optionally available.

 BL 520

Capacity 500 l
Temperature setting +4 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power consumtion 316 Watts
Normal consumption 2,5 KW / 24 h
Overall dimensions incl. distance from wall 77 x 76 x 193 - 196 (w x d x h in cm)
Interior dimensions 62 x 56 x 140 (w x d x h in cm)
Usable dimensions 60 x 45 x 127 (w x d x h in cm)
Overall dimensions with door open at 90° 77 x 144 (w x d in cm)
Drawer inner dimensions 56 x 39 x 10 (w x d x h in cm)
Loading capacity per drawer 50 kg
Weight 124 kg / 154 kg (net / gros)

Read more...

  • 5 aluminium drawers
  • Comfort controller
  • Micro-processor controlled
  • temperature and thawing
  • regulation to maximize
  • temperature stability
  • Battery for power failure alarm
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Melt water evaporation
  • Drawers height-adjustable
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Minimum/Maximum temperature memory
  • Optical and acoustical warning including power failure alarm
  • Saftey control device prevents freezing
  • Potential free contact and interface RS485
  • Low-noise compressor
  • Lockable door

BL-720

In most of our blood bank fridge an LED batten light fitting can be installed at an extra cost which guarantees that the interior is well-lit. We are also able to supply lockable glass doors, so you can look inside without having to open the door.

 BL 720

Capacity 700 l
Temperature setting +4 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power consumption 316 Watts
Normal consumption 2,8 KW / 24 h
Overall dimensions incl. distance from wall 77 x 98 x 193 - 196 (w x d x h in cm)
Interior dimensions 62 x 77 x 140 (w x d x h in cm)
Usable dimensions 60 x 66 x 127 (w x d x h in cm)
Overall dimensions with door open at 90° 77 x 166 (w x d in cm)
Drawer inner dimensions 56 x 60 x 10 (w x d x h in cm)
Loading capacity per drawer 50 kg
Weight 163 kg / 198 kg (net / gross)

Read more...

  • 5 aluminium drawers
  • Comfort controller
  • Micro-processor controlled
  • temperature and thawing
  • regulation to maximize
  • temperature stability
  • Battery for power failure alarm
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Melt water evaporation
  • Drawers height-adjustable
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Minimum/Maximum temperature memory
  • Optical and acoustical warning including power failure alarm
  • Saftey control device prevents freezing
  • Potential free contact and interface RS-485
  • Lockable door

Plasma freezers

BL models are our top products. Each blood bank freezer features thick housing insulation and innovations as standard equipment. They are compliant with the DIN 58375 standard.
KIRSCH is manufacturer. This enables us to develop our blood plasma freezer constantly. Each device consists of a robust housing and high quality components "Made in Germany". This guarantees reliability and a long economic life-time which in return saves your money.
Standard equipment:
DIN 58375 compliant
Aluminium / stainless steel drawers
Comfort controller
Micro-processor controlled temperature and thawing regulation to maximize
temperature stability
Battery for power failure alarm
Heated door frame
Re-circulating air cooling
Optimized ventilation plates to minimize interior temperature differences
Rapid defrosting
Melt water evaporation
Height-adjustable drawers*
Easy accessible control panel with key switch
Easy-to-read LED temperature display
Optical and acoustical warning including power failure alarm
Minimum/maximum temperature memory
RS-485 interface for computer based temperature documentation
Potential free contact for alarm transmission.

*Except FROSTER-BL-178, FROSTER-BL-180 and FROSTER-BL-650.

FROSTER-BL-178

All KIRSCH Blood Plasma Freezers are fitted with an automatic rapid defrosting system. The defrosting process is thermically monitored and temporarily limited. This prevents freezing of the interior and the temperature of the appliance’s contents is being kept constant in accordance with applicable regulations.

 Froster BL 178

Capacity 170 l
Temperature setting (approx.) -32°C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 460 Watt
Normal consumption 5,3 KW / 24 h
Overall dimensions incl. distance from wall 70 x 77 x 122 (w x d x h in cm)
Interior dimensions 55 x 52 x 60 (w x d x h in cm)
Usable dimensions 52 x 41 x 47 (w x d x h in cm)
Overall dimensions with door open at 90° 70 x 136 (w x d in cm)
Drawer inner dimensions 50 x 34 x 10 (w x d x h in cm)
Max. loading capacity per drawer 50 kg
Weight 104 kg / 117 kg (net / gross)

Read more...

  • 3 aluminium drawers
  • Comfort controller
  • Micro-processor controlled temperature and thawing
  • regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Melt water evaporation
  • Easy accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/maximum temperature memory
  • RS485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER-BL-180

Storage temperature of this freezer is -41°C. The combination of stainless steel drawers with panels together with a specially controlled re-circulating air cooling and the most powerful refrigerating technology guarantees a constant storage temperature of -41°C.

 Froster BL 180

Capacity 170 l
Temperature setting (approx.) -41°C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 460 Watt
Normal consumption 5,9 KW / 24 h
Overall dimensions incl. distance from wall 70 x 77 x 122 (w x d x h in cm)
Interior dimensions 55 x 52 x 60 (w x d x h in cm)
Usable dimensions 53 x 37 x 47 (w x d x h in cm)
Overall dimensions with door open at 90° 70 x 136 (w x d in cm)
Drawer inner dimensions 52 x 32 x 10 (w x d x h in cm)
Max. loading capacity per drawer 50 kg
Weight 115 kg / 125 kg (net / gross)

Read more...

  • 3 stainless steel drawers
  • Comfort controller
  • Micro-processor controlled temperature and thawing
  • regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Melt water evaporation
  • Easy accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/maximum temperature memory
  • RS485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER-BL-330

This model features 4 vertically adjustable drawers made of aluminium which rest on telescopic runners. Drawers made of stainless steel are optionally available. We also supply dividers for a neatly and clearly arranged storage of the goods for both types of drawers.

 Froster BL 330

Capacity 300 l
Temperature setting -32°C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 490 Watts
Normal consumption 6,85 KW / 24 h
Overall dimensions incl. distance from wall 74 x 78 x 159 (w x d x h in cm)
Interior dimensions 59 x 52 x 95 (w x d x h in cm)
Usable dimensions 57 x 42 x 82 (w x d x h in cm)
Overall dimensions with door open at 90° 74 x 142 (w x d in cm)
Drawer inner dimensions 54 x 37 x 10 (w x d x h in cm)
Loading capacity per drawer 50 kg
Weight 124 kg / 139 kg (net / gross)

Read more...

  • 4 aluminium drawers
  • Comfort controller
  • Micro-processor controlled temperature and thawing
  • regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Melt water evaporation
  • Height-adjustable drawers
  • Easy accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/maximum temperature memory
  • RS485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER-BL-530

For all blood plasma freezers a PC-Kit is available for temperature evaluation, monitoring and documentation. Monitoring can also be done with the KIRSCH-DATANET Software-package. You find more information on this software in the corresponding description "KIRSCH-PC-KIT".

 Froster BL 530

Capacity 500 l
Temperature setting -32°C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 730 Watts
Normal consumption 9,8 KW / 24 h
Overall dimensions incl. distance from wall 77 x 76 x 193 - 196 (w x d x h in cm)
Interior dimensions 62 x 56 x 140 (w x d x h in cm)
Usable dimensions 60 x 45 x 127 (w x d x h in cm)
Overall dimensions with door open at 90° 77 x 144 (w x d in cm)
Drawer inner dimensions 56 x 39 x 10 (w x d x h in cm)
Loading capacity per drawer 50 kg
Weight 159 kg / 189 kg (net / gross)

Read more...

  • 5 aluminium drawers
  • Comfort controller
  • Micro-processor controlled temperature and thawing
  • regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Melt water evaporation
  • Height-adjustable drawers
  • Easy accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/maximum temperature memory
  • RS485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER-BL-650

Storage temperature of this freezer is -41°C. A two-stage refrigeration machine generates the necessary cooling so that this temperature is kept constant. This enables operation of the freezer in ambient temperatures of up to +32°C.

 Froster BL 650

Capacity 650 l
Temperature setting -41°C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 960 Watts
Normal consumption 11,1 KW / 24 h
Overall dimensions incl. distance from wall 83 x 102 x 197 (w x d x h in cm)
Interior dimensions 62 x 76 x 131 (w x d x h in cm)
Usable dimensions 59 x 65 x 118 (w x d x h in cm)
Overall dimensions with door open at 90° 86 x 177 (w x d in cm)
Drawer inner dimensions, upper drawer 59 x 56 x 22 (w x d x h in cm)
Drawer inner dimensions, 4 drawers below 59 x 62 x 22 (w x d x h in cm)
Loading capacity per drawer 50 kg
Weight 220 kg / 260 kg (net / gross)

Read more...

  • 5 stainless steel drawers
  • Comfort controller
  • Micro-processor controlled temperature and thawing
  • regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Melt water evaporation
  • Easy accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/maximum temperature memory
  • RS485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER-BL-730

Selected models can be fitted with a water-cooled refrigeration machine on request. The generated heat gets derived into a cold water cycle, which is already installed in the device. This provides thermal relief in the installation room.

 Froster BL 730

Capacity 700 l
Temperature setting -32°C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 730 Watts
Normal consumption 11,4 KW / 24 h
Overall dimensions incl. distance from wall 77 x 98 x 193 - 196 (w x d x h in cm)
Interior dimensions 62 x 77 x 140 (w x d x h in cm)
Usable dimensions 60 x 66 x 127 (w x d x h in cm)
Overall dimensions with door open at 90° 77 x 166 (w x d in cm)
Drawer inner dimensions 56 x 60 x 10 (w x d x h in cm)
Loading capacity per drawer 50 kg
Weight 199 kg / 234 kg (net / gross)

Read more...

  • 5 aluminium drawers
  • Comfort controller
  • Micro-processor controlled temperature and thawing
  • regulation to maximize temperature stability
  • Battery for power failure alarm
  • Heated door frame
  • Re-circulation air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid defrosting
  • Melt water evaporation
  • Height-adjustable drawers
  • Easy accessible control panel with key switch
  • Easy-to-read LED temperature display
  • Optical and acoustical warning including power failure alarm
  • Minimum/maximum temperature memory
  • RS485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

 

Laboratory refrigerators

Even temperature distribution and homogeneity in the interior

Every KIRSCH laboratory refrigerator is reliable and creates optimal conditions for storing your sensitive goods. Our laboratory refrigerators are world leaders when it comes to temperature constancy.

ADVANTAGES

Being a manufacturer enables us steady, on-going development of our products. Each unit consists of robust housing and high-quality components Made in Germany. This guarantees reliability and longevity, which ultimately saves your budget.

WITHOUT EXPLOSION-PROOF INTERIOR
Maximized temperature stability and thick housing insulation made of high-quality, pressure-foamed material. Each laboratory freezer guarantees safe storage for your sensitive goods.

LABO 100 PRO-ACTIVE

This laboratory refrigerator can be installed normally as well as in an undercounter installation. Door coupling fittings or decorative frames are available at an extra cost. When the device is being installed as a stand-alone unit we can optionally supply a matching tabletop.

 LABO 100 PRO ACTIVE

Capacity 95 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 76 Watts
Average consumption 0,64 KWh / 24 h
Overall dimensions (incl. distance from wall) 54 x 54 x 82 (w x d x h in cm)
Interior dimensions 44 x 43 x 47 (w x d x h in cm)
Overall dimensions with door opened at 90° 54 x 106 (w x d in cm)
Drawer inner dimensions 40 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 43 x 36 (w x d in cm)
Max. loading capacity per drawer/shelf 13 kg / 25 kg
Weight 46 kg / 50 kg (net / gross)

(measured values based on Ecool R600a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 2 shelves
  • Re-circulating air cooling
  • Undercounter type
  • Warning in case of power failure (optical and acoustic)
  • Automatic defrosting
  • Meltwater evaporation
  • Easy-to-read LED temperature display
  • Automatical defrosting and meltwater evaporation
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Low-noise compressor (noise level I; sounds perception: whisper)
  • Lockable door

LABO 126 PRO-ACTIVE

This laboratory refrigerator can be installed normally as well as in an undercounter installation.

 LABO 126 PRO ACTIVEa

Capacity 120 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 105 Watts
Average consumption 0,58 KWh / 24 h
Overall dimensions (incl. distance from wall) 54 x 53,5 x 88,8 (w x d x h in cm)
Interior dimensions 44 x 42 x 67 (w x d x h in cm)
Overall dimensions with door opened at 90° 54 x 106 (w x d in cm)
Shelf dimensions 43 x 33 (w x d in cm)
Max. loading capacity per shelf 25 kg
Weight 47 kg / 57 kg (net / gross)

(measured values based on Ecool R600a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 2 shelves
  • Undercounter type
  • Adjustable feet
  • Warning in case of power failure (optical and acoustic)
  • Automatic defrosting
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Lockable door

LABO 288 PRO-ACTIVE

This laboratory fridge comes with 3 shelves as standard.

 LABO 288 PRO ACTIVE

Capacity 280 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 88 Watts
Average consumption 0,68 KWh / 24 h
Overall dimensions (incl. distance from wall) 67 x 75 x 124 (w x d x h in cm)
Interior dimensions 53 x 50 x 100 (w x d x h in cm)
Overall dimensions with door opened at 90° 67 x 135 (w x d in cm)
Shelf dimensions 52 x 39 (w x d in cm)
Max. loading capacity per drawer/shelf 40 kg
Weight 78 kg / 85 kg (net / gross)

(measured values based on Ecool R600a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 3 shelves, height- adjustable
  • Re-circulating air cooling
  • Warning in case of power failure (optical and acoustic)
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and meltwater evaporation
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

LABO 340 PRO-ACTIVE

The laboratory fridge comes with 1 drawer and 4 shelves as standard.

 LABO 340 PRO ACTIVE mittel

Capacity 330 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 110 Watts
Average consumption 0,65 KWh / 24 h
Overall dimensions (incl. distance from wall) 67 x 69 x 181 (w x d x h in cm)
Interior dimensions 53 x 45 x 128 (w x d x h in cm)
Overall dimensions with door opened at 90° 67 x 127 (w x d in cm)
Drawer inner dimensions 50,4 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 53 x 39 (w x d in cm)
Max. loading capacity per drawer/shelf 16 kg / 40 kg
Weight 88 kg / 100 kg (net / gross)

(measured values based on Ecool R600a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 1 drawer and 4 shelves, height- adjustable
  • Re-circulating air cooling
  • Warning in case of power failure (optical and acoustic)
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and meltwater evaporation
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

LABO 468 PRO-ACTIVE

This laboratory refrigerator has 4 vertically adjustable and plastic coated shelves that rest on mountings. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well.

 LABO 468 PRO ACTIVE

Capacity 460 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 170 Watts
Average consumption 1,00 KWh / 24 h
Overall dimensions (incl. distance from wall) 74 x 80 x 181 (w x d x h in cm)
Interior dimensions 60 x 57 x 128 (w x d x h in cm)
Overall dimensions with door opened at 90° 74 x 144 (w x d in cm)
Shelf dimensions 59 x 50(w x d in cm)
Max. loading capacity per drawer/shelf 24 kg / 40 kg
Weight 109 kg / 122 kg (net / gross)

(measured values based on Ecool R600a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 4 shelves, height-adjustable
  • Re-circulating air cooling
  • Warning in case of power failure (optical and acoustic)
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and meltwater evaporation
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Low-noise compressor
  • Lockable door

LABO 520 PRO-ACTIVE

This laboratory refrigerator has 5 vertically adjustable and plastic coated shelves that rest on mountings. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well.

 LABO 520 PRO ACTIVE mittel

Capacity 500 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 250 Watts
Average consumption 1,40 KWh / 24 h
Overall dimensions (incl. distance from wall) 77 x 76 x 195,5 (w x d x h in cm)
Interior dimensions 62 x 57 x 140 (w x d x h in cm)
Overall dimensions with door opened at 90° 74 x 144 (w x d in cm)
Shelf dimensions 59 x 45 (w x d in cm)
Max. loading capacity per drawer/shelf 40 kg
Weight 120 kg / 148 kg (net / gross)

(measured values based on Ecool R600a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • Castors
  • 5 shelves, height-adjustable
  • Re-circulating air cooling
  • Warning in case of power failure (optical and acoustic)
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and meltwater evaporation
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Low-noise compressor
  • Lockable door

LABO 720 PRO-ACTIVE

This laboratory refrigerator has 5 vertically adjustable and plastic coated shelves that rest on mountings. This laboratory refrigerator can optionally be fitted with a glass door.

 LABO 720 PRO ACTIVE mittel

Capacity 700 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 250 Watts
Average consumption 1,46 KWh / 24 h
Overall dimensions (incl. distance from wall) 77 x 98 x 195,5 (w x d x h in cm)
Interior dimensions 62 x 77 x 140 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 165 (w x d in cm)
Shelf dimensions 59 x 65 (w x d in cm)
Max. loading capacity per drawer/shelf 40 kg
Weight 145 kg / 174 kg (net / gross)

(measured values based on Ecool R600a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 5 shelves, height-adjustable
  • Castors.
  • Re-circulating air cooling
  • Warning in case of power failure (optical and acoustic)
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and meltwater evaporation
  • Rapid defrosting
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software
  • Potential free contact for alarm transmission
  • Low-noise compressor

LABO 720 CHROMAT PRO-ACTIVE

This laboratory fridge has a glass door, an integrated power outlet strip with 3 sockets and a cable bushing with a diameter of approximately 7 cm fitted as standard. The cable bushing is located in the middle of the right-side panel.

* Pic. with aluminium basket (optional equipment, not standard configuration)

 LABO 720 CHROMAT PRO ACTIVE mittel

Capacity 720 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 250 Watts
Average consumption 1,63 KWh / 24 h
Overall dimensions (incl. distance from wall) 77 x 98 x 195,5 (w x d x h in cm)
Interior dimensions 62 x 77 x 140 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 165 (w x d in cm)
Shelf dimensions 59 x 65 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 145 kg / 174 kg (net / gross)

(measured values based on Ecool R600a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 5 shelves, height-adjustable
  • Castors
  • Warning in case of power failure (optical and acoustic)
  • Insulating glass door and interior light
  • Built-in 3-way-socket
  • Access port for cables and probes diameter app. 7 cm
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and meltwater evaporation
  • Rapid defrosting
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Low-noise compressor
  • Potential free contact for alarm transmission
  • Low-noise compressor
  • Lockable door

EXPLOSION-PROOF VERSION


LABEX®-Intrinsic Safety
The storage of your sensitive and highly flammable substances requires both precise and reliable cooling. All of our LABEX®-Laboratory Refrigerators with the special re-circulating air cooling concept (intrinsically safe) are specifically designed for the storage of explosive materials. Our quality characteristic of Intrinsic Safety is described as follows:

  • Intrinsically safe supply of the interior, that means the components do not generate sparks.
  • Special conduction concept for electric flows, that may arise due to static charge (e.g., by the operator).

ADVANTAGES

KIRSCH airflow concept: re-circulating air-cooling by means of a cross-flow blower combined with optimized ventilation plates. This concept keeps the temperature constant and reduces natural temperature stratification.

  • Structural safety for all non-electrical components
  • Energy restriction of the power circuits on the interior
  • Temperature sensors are protected by safety barriers
  • Re-circulating blower protected by a safety power pack
  • Ground protection for the complete refrigerator interior (potential equality)
  • Refrigerator interior is not opened to the outside (manual removal of meltwater)
  • Material combinations on the inside are non-combustible
  • Production facilities are inspected by an independent accredited company

LABEX 105 PRO-ACTIVE

This laboratory refrigerator can be installed normally as well as in an undercounter installation. The temperature and defrosting probes are protected by special safety barriers.

 LABEX 105 PRO ACTIVE

Capacity 95 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 86 Watts
Average consumption 0,43 KWh / 24 h
Overall dimensions (incl. distance from wall) 54 x 54 x 82 (w x d x h in cm)
Interior dimensions 44 x 43 x 47 (w x d x h in cm)
Overall dimensions with door opened at 90° 54 x 106 (w x d in cm)
Drawer inner dimensions 40 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 43 x 36 (w x d in cm)
Max. loading capacity per drawer/shelf 13 kg / 25 kg
Weight 46 kg / 50 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors.
  • 1 drawer and 2 shelves
  • Explosion-proof interior (LABEX®-Standard Safety)
  • Undercounter type
  • Lockable door
  • Key switch
  • Automatic defrosting
  • Easy-to-read LED temperature display
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission

LABEX 288 PRO-ACTIVE

This laboratory fridge features 1 plastic drawer and 3 plastic-coated shelves as standard. All shelves and inserts are vertically adjustable and the device has an explosion-proof interior. A glass door can also be ordered optionally.

 LABEX 288 PRO ACTIVE

Capacity 280 l
Temperature setting (approx.) +0 to +15 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 100 Watts
Average consumption 0,76 KWh / 24 h
Overall dimensions (incl. distance from wall) 67 x 75 x 131 (w x d x h in cm)
Interior dimensions 53 x 50 x 100 (w x d x h in cm)
Overall dimensions with door opened at 90° 67 x 135 (w x d in cm)
Drawer inner dimensions 50,4 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 52,7 x 39 (w x d in cm)
Max. loading capacity per drawer/shelf 16 kg / 40 kg
Weight 72 kg / 85 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • Re-circulating air cooling
  • 1 drawer and 3 shelves, height-adjustable
  • Warning in case of power failure (optical and acoustic)
  • Explosion-proof interior (LABEX®-Increased-Safety)
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission

LABEX 340 PRO-ACTIVE

This laboratory fridge features 2 plastic drawers and 4 plastic-coated shelves as standard. All shelves and inserts are vertically adjustable and the device has an explosion-proof interior. Optionally the laboratory refrigerator can also be fitted with castors

 LABEX 340 PRO ACTIVE

Capacity 330 l
Temperature setting (approx.) +0 to +15 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 128 Watts
Average consumption 1,14 KWh / 24 h
Overall dimensions (incl. distance from wall) 67 x 69 x 181 (w x d x h in cm)
Interior dimensions 53 x 45 x 128 (w x d x h in cm)
Overall dimensions with door opened at 90° 67 x 127 (w x d in cm)
Drawer inner dimensions 50,4 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 52,7 x 39 (w x d in cm)
Max. loading capacity per drawer/shelf 16 kg / 40 kg
Weight 93 kg / 105 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • Re-circulating air cooling
  • 2 drawers and 4 shelves, height-adjustable
  • Warning in case of power failure (optical and acoustic)
  • Explosion-proof interior (LABEX®-Intrinsic Safety)
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission

LABEX 468 PRO-ACTIVE

This laboratory refrigerator features 6 shelves as standard. Plastic drawer with adjustable longitudinal and cross dividers or aluminium trays on telescopic runners are available at an extra cost. All shelves and inserts are vertically adjustable and the device has an explosion-proof interior. A glass door can also be ordered optionally.

 LABEX 468 PRO ACTIVE

Capacity 460 l
Temperature setting (approx.) +0 to +15 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 170 Watts
Average consumption 1,03 KWh / 24 h
Overall dimensions (incl. distance from wall) 74 x 80 x 181 (w x d x h in cm)
Interior dimensions 60 x 57 x 128 (w x d x h in cm)
Overall dimensions with door opened at 90° 74 x 144 (w x d in cm)
Drawer inner dimensions 57 x 43 x 5,6 (w x d x h in cm)
Shelf dimensions 59 x 50 (w x d in cm)
Max. loading capacity per drawer/shelf 24 kg / 40 kg
Weight 112 kg / 125 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • Re-circulating air cooling
  • 6 shelves, height-adjustable
  • Warning in case of power failure (optical and acoustic)
  • Explosion-proof interior (LABEX®-Increased-Safety)
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission

LABEX 520 PRO-ACTIVE

The LABEX®-520 offers you five standard integrated shelves and 500 liters capacity plenty of storage space for your refrigerated goods. The interior is completely flexible adapting to your needs. The interior is explosion-proof and intrinsically safe. A glass door can also be ordered optionally.

 LABEX 520 PRO ACTIVE mittel

Capacity 500 l
Temperature setting (approx.) +0 to +15 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 234 Watts
Average consumption 1,2 KWh / 24 h
Overall dimensions (incl. distance from wall) 77 x 76 x 195,5 (w x d x h in cm)
Interior dimensions 62 x 57 x 140 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 144 (w x d in cm)
Shelf dimensions 59 x 45 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 120 kg / 148 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors.
  • Re-circulating air cooling
  • Castors
  • Warning in case of power failure (optical and acoustic)
  • 5 shelves, height-adjustable
  • Explosion-proof interior (LABEX®-Intrinsic Safety)
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Low-noise compressor

LABEX 720 PRO-ACTIVE

This laboratory refrigerator offers five standard integrated shelves and with 700 liters capacity plenty of storage space for your refrigerated goods. The forced air cooling ensures a nearly uniform temperature distribution in the interior, which is explosion-proof and intrinsically safe. The interior can be extended optional.

 LABEX 720 PRO ACTIVE mittel

Capacity 700 l
Temperature setting (approx.) +0 to +15 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 237 Watts
Average consumption 1,23 KWh / 24 h
Overall dimensions (incl. distance from wall) 77 x 98 x 195,5 (w x d x h in cm)
Interior dimensions 62 x 77 x 140 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 165 (w x d in cm)
Shelf dimensions 59 x 65 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 145 kg / 174 kg (net / gross)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors.
  • Re-circulating air cooling
  • Castors
  • Warning in case of power failure (optical and acoustic)
  • 5 shelves, height-adjustable
  • Explosion-proof interior (LABEX®-Intrinsic Safety)
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Low-noise compressor

Laboratory freezers

KIRSCH Laboratory Freezers stand out particularly thanks to their thick housing insulation made of high-quality, pressure-foamed material. Our LABEX models are explosion-proof. The storage temperature can be adjusted between -5 °C and -30 °C depending on the model..

WITHOUT EXPLOSION-PROOF INTERIOR
Maximized temperature stability and a thick housing insulation made of high-quality, pressure-foamed material. Each laboratory freezer guarantees safe storage for your sensitive goods.

FROSTER LABO 330 PRO-ACTIVE

This laboratory freezer features re-circulating air cooling, a rapid defrosting system and a quick-freeze function. 4 plastic-coated shelves on mountings are fitted as standard. The shelves can optionally rest on support rails. Besides this standard option wire baskets on runners are also available.

 FROSTER LABO 330 PRO ACTIVE

Capacity 300 l
Temperature setting (approx.) -10 to -30 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 590 Watts
Average consumption 3,69 KWh / 24 h
Overall dimensions (incl. distance from wall) 74 x 77 x 166 (w x d x h in cm)
Interior dimensions 59,5 x 53 x 95 (w x d x h in cm)
Overall dimensions with door opened at 90° 74 x 141 (w x d in cm)
Shelf dimensions 57 x 42 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 127 kg / 142 kg (net / gross)

(Measured values based on Frigen R404a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 4 shelves, height-adjustable
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Additional warning in case of power failure (optical and acoustic)
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Automatical defrosting and meltwater evaporation
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER LABO 530 PRO-ACTIVE

This laboratory refrigerator features re-circulating air cooling, a rapid defrosting system and a quick-freeze function. 5 plastic-coated shelves on mountings are fitted as standard. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well.

 FROSTER LABO 530 PRO ACTIVE

Capacity 500 l
Temperature setting (approx.) -10 to -30 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 605 Watts
Average consumption 7,22 KWh / 24 h
Overall dimensions (incl. distance from wall) 77 x 76 x 195,5 (w x d x h in cm)
Interior dimensions 60 x 57 x 140 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 144 (w x d in cm)
Shelf dimensions 59 x 65 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 140 kg / 183 kg (net / gross)

(Measured values based on Frigen R404a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 5 shelves, height-adjustable
  • Castors
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Additional warning in case of power failure (optical and acoustic)
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Automatical defrosting and meltwater evaporation
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER LABO 730 PRO-ACTIVE

This laboratory refrigerator features re-circulating air cooling, a rapid defrosting system and a quick-freeze function. 5 plastic-coated shelves on mountings are fitted as standard. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well.

 FROSTER LABO 730 PRO ACTIVE

Capacity 700 l
Temperature setting (approx.) -10 to -30 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 605 Watts
Average consumption 7,51 KWh / 24 h
Overall dimensions (incl. distance from wall) 77 x 97 x 195,5 (w x d x h in cm)
Interior dimensions 60 x 78 x 140 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 165 (w x d in cm)
Shelf dimensions 59 x 65 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 165 kg / 200 kg (net / gross)

(Measured values based on Frigen R404a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 5 shelves, height-adjustable
  • Castors
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Additional warning in case of power failure (optical and acoustic)
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Automatical defrosting and meltwater evaporation
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door
EXPLOSION-PROOF
TÜV-certified explosion proofness: Our LABEX laboratory freezers fulfill the safety requirements for explosion-proof areas of zone 2 and guarantee that the interior is free of ignition sources.

FROSTER LABEX 96 PRO-ACTIVE

This laboratory refrigerator features 2 coated shelves height-adjustable.

 FROSTER LABEX 96 PRO ACTIVE

Capacity 95 l
Temperature setting (approx.) -5 to -25 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 119 Watts
Average consumption 1,36 KWh / 24 h
Overall dimensions (incl. distance from wall) 54 x 54 x 82 (w x d x h in cm)
Interior dimensions 44 x 42 x 47 (w x d x h in cm)
Overall dimensions with door opened at 90° 54 x 106 (w x d in cm)
Shelf dimensions 43 x 36 (w x d in cm)
Max. loading capacity per shelf 25 kg
Weight 42 kg / 50 kg (net / gross)

(Measured values based on Frigen R404a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors.
  • 2 shelves, height-adjustable
  • Re-circulating air cooling
  • Explosion-proof interior (LABEX®-Intrinsic Safety)
  • Optimized ventilation plates to minimize interior temperature differences
  • Additional warning in case of power failure (optical and acoustic)
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER LABEX 330 PRO-ACTIVE

This laboratory freezer features re-circulating air cooling, a rapid defrosting system and a quick-freeze function. The unit also features an explosion-proof interior. 4 plastic-coated shelves on mountings are fitted as standard. The shelves can optionally rest on telescopic runner. Besides this standard option wire baskets on runners are also available.

 FROSTER LABEX 330 PRO ACTIVE mittel

Capacity 300 l
Temperature setting (approx.) -10 to -30 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 540 Watts
Average consumption 4,33 KWh / 24 h
Overall dimensions (incl. distance from wall) 74 x 78 x 159 (w x d x h in cm)
Interior dimensions 59 x 52 x 95 (w x d x h in cm)
Overall dimensions with door opened at 90° 74 x 142 (w x d in cm)
Shelf dimensions 57 x 42 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 127 kg / 142 kg (net / gross)

(Measured values based on Frigen R404a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 4 shelves, height-adjustable
  • Re-circulating air cooling
  • Explosion-proof interior (LABEX®-Intrinsic Safety)
  • Optimized ventilation plates to minimize interior temperature differences
  • Additional warning in case of power failure (optical and acoustic)
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER LABEX 530 PRO-ACTIVE

This laboratory freezer features re-circulating air cooling, a rapid defrosting system and a quick-freeze function. 5 plastic-coated shelves on mountings are fitted as standard. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well.

 FROSTER LABEX 530 PRO ACTIVE mittel

Capacity 500 l
Temperature setting (approx.) -10 to -30 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 550 Watts
Average consumption 5,8 KW / 24 h
Overall dimensions (incl. distance from wall) 77 x 76 x 195,5 (w x d x h in cm)
Interior dimensions 62 x 57 x 140 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 144 (w x d in cm)
Shelf dimensions 59 x 45 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 138 kg / 163 kg (net / gross)

(Measured values based on Frigen R404a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors.
  • 5 shelves, height-adjustable
  • Castors
  • Re-circulating air cooling
  • Explosion-proof interior (LABEX®-Intrinsic Safety)
  • Optimized ventilation plates to minimize interior temperature differences
  • Additional warning in case of power failure (optical and acoustic)
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Optical and acoustical alarm
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER LABEX 730 PRO-ACTIVE

This laboratory freezer has 5 vertically adjustable and plastic coated shelves that rest on mountings. This laboratory freezer can also be fitted with wire baskets and aluminium trays on runners at a surcharge.

 FROSTER LABEX 730 PRO ACTIVE mittel

Capacity 700 l
Temperature setting (approx.) -10 to -30 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 550 Watts
Average consumption 6,02 KWh/ 24 h
Overall dimensions (incl. distance from wall) 77 x 98 x 195,5 (w x d x h in cm)
Interior dimensions 62 x 77 x 140 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 166 (w x d in cm)
Shelf dimensions 59 x 65 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 165 kg / 200 kg (net / gross)

(Measured values based on Frigen R404a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 5 shelves, height-adjustable
  • Castors
  • Re-circulating air cooling
  • Explosion-proof interior (LABEX®-Intrinsic Safety)
  • Additional warning in case of power failure (optical and acoustic)
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Potential free contact for alarm transmission
  • Lockable door

 

Laboratory refrigerators

Optimal conditions for your sensible goods. Because laboratory refrigerators by KIRSCH are leading worldwide in temperature stability. They are also available as explosion-proof versions.

BASIC MODEL WITHOUT EXPLOSION-PROOF INTERIOR
Maximized temperature stability and a thick housing insulation made of high-quality, pressure-foamed material. Each laboratory freezer guarantees a safe storage for your sensitive goods.

LABO-85

This laboratory refrigerator LABO-85 is mainly being used as a built-in device. You will find all necessary measurements for installation on page 2 of the PDF file which can be accessed in the download section. If the static ventilation is insufficient a refrigeration machine ventilator can optionally be integrated.

 Labo 85

Capacity 80 l
Temperature setting (approx.) +2 to +12 °C
Voltage 220 - 240 V
Frequeny 50 Hz
Power draft 100 Watts
Average consumption 0,6 KW / 24 h
Overall dimensions (incl. distance from wall) 47 x 51 x 74 (w x d x h in cm)
Interior dimensions 38 x 41 x 63 (w x d x h in cm)
Usable dimensions (usable depth above 5 cm, below 15 cm less)
Overall dimensions with door opened at 90° 47 x 96 (w x d in cm)
Drawer inner dimensions 32 x 30 x 5 (w x d x h in cm)
Shelf dimensions 23 x 37 or 34 x 37 (w x d in cm)
Max. loading capacity per drawer/shelf 9,5 kg / 25 kg
Weight 31 kg / 37 kg (net / gross)

Read more...

  • 1 drawer and 2 shelves
  • Undercounter type
  • Automatic defrosting
  • Melt water evaporation
  • Stepless temperature selection
  • Lockable door

LABO-100

The laboratory refrigerator LABO-100 can be installed normally as well as in an undercounter installation. Door coupling fittings or decorative frames are available at an extra cost. When the device is being installed as a stand-alone unit we can optionally supply a matching tabletop.

 Labo 100

Capacity 95 l
Temperature setting (approx.) +2 to +20 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 150 Watts
Average consumption 0,42 KW / 24 h
Overall dimensions (incl. distance from wall) 54 x 53,5 x 82 (w x d x h in cm)
Interior dimensions 44 x 43 x 47 (w x d x h in cm)
Usable dimensions 42 x 38 x 47 (w x d x h in cm)
Overall dimensions with door opened at 90° 54 x 105,5 (w x d in cm)
Drawer inner dimensions 40,8 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 43,8 x 24 (w x d in cm)
Max. loading capacity per drawer/shelf 13 kg / 25 kg
Weight 42 kg / 50 kg (net / gross)

Read more...

  • 2 shelves
  • Re-circulating air cooling
  • Undercounter type
  • Automatic defrosting
  • Melt water evaporation
  • Easy-to-read LED temperature display
  • Automatical defrosting and melt water evaporation
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Low-noise compressor (noise level I; sounds perception: whisper)
  • Lockable door

LABO-125

 The laboratory fridge LABO-125 can be installed normally as well as in an undercounter installation. Door coupling fittings or decorative frames are available at an extra cost. The temperature display can optionally be installed in the front side of an external furniture. When the device is being installed as a stand-alone unit we can supply a matching tabletop at a surcharge.

 Labo 125

Capacity 120 l
Temperature setting (approx.) +2 to +20 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 125 Watts
Average consumption 0,55 KW / 24 h
Overall dimensions (incl. distance from wall) 54 x 53,5 x 81 (w x d x h in cm)
Interior dimensions 44 x 42 x 67 (w x d x h in cm)
Usable dimensions (usable depth above 5 cm, below 14 cm less)
Overall dimensions with door opened at 90° 54 x 105,5 (w x d in cm)
Shelf dimensions 43,8 x 24 or 43,8 x 33 (w x d in cm)
Max. loading capacity per drawer/shelf 13 kg / 25 kg
Weight 42 kg / 50 kg (net / gross)

Read more...

  • 2 shelves
  • Undercounter type
  • Automatic defrosting
  • Melt water evaporation
  • Digital temperature display
  • Acoustic warning device
  • Lockable door

LABO-288

The laboratory fridge LABO-288 comes with 3 shelves as standard. The refrigerator can also be equipped with power failure alarm against surcharge.

 

Capacity 280 l
Temperature setting (approx.) +2 to +20 °C
Voltage 220 - 240 V
Frequency 50/60 Hz
Power consumption 155 Watts
Normal consumption 1,00 KW / 24 h
Admissible ambient temperature from +10 °C to +38 °C
Heat emission (max.) 203 watts
Exterior dimensions 67 x 70 x 124 (w x d x h in cm)
Interior dimensions 53 x 50 x 100 (w x d x h in cm)
Exterior dimensions with door opened at 90° 67 x 130 (w x d in cm)
Shelf inner dimensions 52 x 39 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 78 kg / 87 kg (net / gross)

Read more...

  • 3 shelves, height- adjustable
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and melt water evaporation
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

LABO-340

The laboratory fridge LABO-340 comes with 1 drawer and 3 shelves as standard. The refrigerator can also be equipped with power failure alarm against surcharge.

 Labo 340

Capacity 330 l
Temperature setting (approx.) +2 to +20 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 150 Watts
Average consumption 1,2 KW / 24 h
Overall dimensions (incl. distance from wall) 67 x 64 x 181 (w x d x h in cm)
Interior dimensions 53 x 45 x 128 (w x d x h in cm)
Usable dimensions 53 x 39 x 128 (w x d x h in cm)
Overall dimensions with door opened at 90° 67 x 122 (w x d in cm)
Drawer inner dimensions 50,4 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 53 x 39 (w x d in cm)
Max. loading capacity per drawer/shelf 16 kg / 40 kg
Weight 90 kg / 97 kg (net / gross)

Read more...

  • 1 drawer and 3 shelves, height- adjustable
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and melt water evaporation
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

LABO-468

The laboratory fridge LABO-468 has 4 vertically adjustable and plastic coated shelves which rest on mountings. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well.

 Labo 468

Capacity 460 l
Temperature setting (approx.) +2 to +20 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 180 Watts
Average consumption 1,4 KW / 24 h
Overall dimensions (incl. distance from wall) 74 x 74 x 181 (w x d x h in cm)
Interior dimensions 60 x 57 x 128 (w x d x h in cm)
Usable dimensions 60 x 51 x 128 (w x d x h in cm)
Overall dimensions with door opened at 90° 74 x 142 (w x d in cm)
Shelf dimensions 60 x 52 (w x d in cm)
Max. loading capacity per drawer/shelf 24 kg / 40 kg
Weight 88 kg / 100 kg (net / gross)

Read more...

  • 4 shelves, height-adjustable
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and melt water evaporation
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Low-noise compressor
  • Lockable door

LABO-520

The laboratory refrigerator LABO-520 has 5 vertically adjustable and plastic coated shelves which rest on mountings. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well.

 Labo 520

Capacity 500 l
Temperature setting (approx.) +0 to +20 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 370 Watts
Average consumption 2,9 KW / 24 h
Overall dimensions (incl. distance from wall) 77 x 76 x 193-196 (w x d x h in cm)
Interior dimensions 62 x 57 x 140 (w x d x h in cm)
Usable dimensions 60 x 46 x 127 (w x d x h in cm)
Overall dimensions with door opened at 90° 74 x 144 (w x d in cm)
Shelf dimensions 59,7 x 45 (w x d in cm)
Max. loading capacity per drawer/shelf 24 kg / 40 kg
Weight 120 kg / 150 kg (net / gross)

Read more...

  • 5 shelves, height-adjustable
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and melt water evaporation
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Low-noise compressor
  • Lockable door

LABO-720

The laboratory fridge LABO-720 has 5 vertically adjustable and plastic coated shelves which rest on mountings. This laboratory refrigerator can optionally be fitted with a glass door and with a warning system that, in case of a power failure, will output optical and acoustic alarms up to 72 hours.

 Labo 720

Capacity 700 l
Temperature setting (approx.) +0 to +20 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 370 Watts
Average consumption 3,0 KW / 24 h
Overall dimensions (incl. distance from wall) 77 x 98 x 193-196 (w x d x h in cm)
Interior dimensions 62 x 77 x 140 (w x d x h in cm)
Usable dimensions 60 x 66 x 127 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 165 (w x d in cm)
Shelf dimensions 59,7 x 65 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 145 kg / 180 kg (net / gross)

Read more...

  • 5 shelves, height-adjustable
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and melt water evaporation
  • Rapid defrosting
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Low-noise compressor

LABO-720-CHROMAT

This laboratory fridge has a glass door, an integrated power outlet strip with 3 sockets and a cable bushing with a diameter of approximately 7 cm fitted as standard. The cable bushing is located in the middle of the right side panel.

 Labo 720 Chromat

Capacity 700 l
Temperature setting (approx.) +4 to +20 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 370 Watts
Average consumption 3,0 KW / 24 h
Overall dimensions (incl. distance from wall) 77 x 98 x 193-196 (w x d x hin cm)
Interior dimensions 62 x 77 x 140 (w x d x hin cm)
Usable dimensions 60 x 66 x 127 (w x d x hin cm)
Overall dimensions with door opened at 90° 77 x 165 (w x d in cm)
Shelf dimensions 59,7 x 65 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 145 kg / 180 kg (net / gross)

Read more...

  • 5 shelves, height-adjustable
  • Insulating glass door and interior light
  • Built-in 3-way-socket
  • Access port for cables and probes
  • diameter app. 7 cm
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and melt water evaporation
  • Rapid defrosting
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Low-noise compressor
  • Lockable door
EXPLOSION-PROOF VERSION
TÜV-certified explosion proofness: Our LABEX®- Laboratory Refrigerators fulfill the safety requirements for explosion-proof areas of zone 2 (ATEX 94/9EG) and guarantee that the interior is free of ignition sources.

LABEX-105

LABEX®-105 can be installed normally as well as in an undercounter installation (necessary measurements for installation on page 2 of the PDF file which can be accessed in the download section). The unit features an explosion-proof interior according to the guideline 94/9/EG (ATEX 95). The temperature and defrosting probes are protected by special safety barriers.

 Labex® 105

Capacity 95 l
Temperature setting (approx.) +2 to +20 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 150 Watts
Average consumption 0,42 KW / 24 h
Overall dimensions (incl. distance from wall) 54 x 53,5 x 82 (w x d x h in cm)
Interior dimensions 44 x 43 x 47 (w x d x h in cm)
Usable dimensions 42 x 38 x 47 (w x d x h in cm)
Overall dimensions with door opened at 90° 54 x 105,5 (w x d in cm)
Drawer inner dimensions 40,8 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 43,8 x 36 (w x d in cm)
Max. loading capacity per drawer/shelf 13 kg / 25 kg
Weight 46 kg / 50 kg (net / gross)

Read more...

  • 1 drawer and 2 shelves
  • Explosion proof interior (LABEX®-Standard Safety)
  • ATEX- 94/9/EG conformity TÜV certified
  • Undercounter type
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission

LABEX-125

LABEX®-125 can be installed normally as well as in an undercounter installation. The unit features an explosion-proof interior according to the guideline 94/9/EG (ATEX 95). When the device is intended to be used as a stand-alone unit we can optionally supply a matching tabletop.

 Labex® 125

Capacity 120 l
Temperature setting (approx.) +2 to +20 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 135 Watts
Average consumption 0,68 KW / 24 h
Overall dimensions (incl. distance from wall) 54 x 53,5 x 81 (w x d x h in cm)
Interior dimensions 44 x 42 x 67 (w x d x h in cm)
Usable dimensions usable depth above 7 cm, wide 2 cm, below 15 cm less
Overall dimensions with door opened at 90° 54 x 105,5 (w x d in cm)
Drawer inner dimensions 40,8 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 43,8 x 24 or 43,8 x 33 (w x d in cm)
Max. loading capacity per drawer/shelf 13 kg / 25 kg
Weight 42 kg / 50 kg (net / gross)

Read more...

  • 1 drawer and 2 shelves
  • Explosion proof interior (LABEX®-Standard Safety)
  • ATEX- 94/9/EG conformity TÜV certified
  • Undercounter type
  • Meltwater tray for manual emptying
  • Stepless temperature selection
EXPLOSION-PROOF WITH FORCED-AIR COOLING
A maxiumum of explosion proofness and a maximum of temperature consistency thanks to our LABEX® technology and the adapted KIRSCH-re-circulating air cooling (optimized air guide panels). The unique combination of intrinsically safety, automatic defrosting and re-circulating air cooling lead to the safest and best storage conditions for your goods.

LABEX-288

This laboratory fridge features 1 plastic drawer and 3 plastic-coated shelves as standard. All shelves and inserts are vertically adjustable and the device has an explosion-proof interior. A glass door can also be ordered optionally.

 Labex® 288

Capacity 280 l
Temperature setting (approx.) +2 to +20 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 140 Watts
Average consumption 0,9 KW / 24 h
Overall dimensions (incl. distance from wall) 67 x 70 x 124 (w x d x h in cm)
Interior dimensions 53 x 50 x 100 (w x d x h in cm)
Usable dimensions usable depth above 9 cm, below 14 cm less
Overall dimensions with door opened at 90° 67 x 130 (w x d in cm)
Drawer inner dimensions 50,4 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 52,7 x 39 (w x d in cm)
Max. loading capacity per drawer/shelf 16 kg / 40 kg
Weight 72 kg / 85 kg (net / gross)

Read more...

  • Re-circulating air cooling compliant with ATEX 95
  • 1 drawer and 3 shelves, height-adjustable
  • Explosion proof interior (LABEX®-Increased-Safety)
  • ATEX- 94/9/EG conformity TÜV certified
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission

LABEX-340

The laboratory fridge LABEX®-340 features 2 plastic drawers and 4 plastic-coated shelves as standard. All shelves and inserts are vertically adjustable and the device has an explosion-proof interior. Optionally the laboratory refrigerator can also be fitted with castors.

 Labex® 340

Capacity 330 l
Temperature setting (approx.) +2 to +20 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 130 Watts
Average consumption 1,0 KW / 24 h
Overall dimensions (incl. distance from wall) 67 x 74 x 181 (w x d x h in cm)
Interior dimensions 53 x 45 x 128 (w x d x h in cm)
Usable dimensions 53 x 39 x 128 (w x d x h in cm)
Overall dimensions with door opened at 90° 67 x 122 (w x d in cm)
Drawer inner dimensions 50,4 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 52,7 x 39 (w x d in cm)
Max. loading capacity per drawer/shelf 16 kg / 40 kg
Weight 88 kg / 98 kg (net / gross)

Read more...

  • Re-circulating air cooling compliant with ATEX 95
  • 2 drawers and 4 shelves, height-adjustable
  • Explosion proof interior (LABEX®-Intrinsic Safety)
  • ATEX- 94/9/EG conformity TÜV certified
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission

LABEX-468

This laboratory refrigerator features 6 plastic-coated shelves as standard. Plastic drawer with adjustable longitudinal and cross dividers or aluminium trays on telescopic runners are available at an extra cost. All shelves and inserts are vertically adjustable and the device has an explosion-proof interior. A glass door can also be ordered optionally.

 Labex® 465

Capacity 460 l
Temperature setting (approx.) +2 to +20 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 170 Watts
Average consumption 1,1 KW / 24 h
Overall dimensions (incl. distance from wall) 74 x 74 x 181 (w x d x h in cm)
Interior dimensions 60 x 57 x 128 (w x d x h in cm)
Usable dimensions 60 x 51 x 128 (w x d x h in cm)
Overall dimensions with door opened at 90° 74 x 142 (w x d in cm)
Drawer inner dimensions 57 x 43 x 5,6 (w x d x h in cm)
Shelf dimensions 59,7 x 50 (w x d in cm)
Max. loading capacity per drawer/shelf 24 kg / 40 kg
Weight 115 kg / 125 kg (net / gross)

Read more...

  • Re-circulating air cooling compliant with ATEX 95
  • 6 shelves, height-adjustable
  • Explosion proof interior (LABEX®-Increased-Safety)
  • ATEX- 94/9/EG conformity TÜV certified
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission

LABEX-520

The LABEX®-520 offers you with five standard integrated shelves and 500 litres capacity plenty of storage space for your refrigerated goods. The interior is completely flexible adapting to your needs. The interior is explosion-proof and intrinsically safe. A glass door can also be ordered optionally.

 Labex® 465

Capacity 500 l
Temperature setting (approx.) +2 to +20 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 230 Watts
Average consumption 2,0 KW / 24 h
Overall dimensions (incl. distance from wall) 77 x 76 x 193-196 (w x d x h in cm)
Interior dimensions 62 x 57 x 140 (w x d x h in cm)
Usable dimensions 60 x 46 x 127 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 144 (w x d in cm)
Drawer inner dimensions 57 x 39 x 5,6 (w x d x h in cm)
Shelf dimensions 59 x 45 (w x d in cm)
Max. loading capacity per drawer/shelf 24 kg / 40 kg
Weight 120 kg / 150 kg (net / gross)

Read more...

  • Re-circulating air cooling compliant with ATEX 95
  • 5 shelves, height-adjustable
  • Explosion proof interior (LABEX®-Intrinsic Safety)
  • ATEX- 94/9/EG conformity TÜV certified
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Low-noise compressor

LABEX-720

The LABEX®-720 offers five standard integrated shelves and with 700 liters capacity plenty of storage space for your refrigerated goods. The adapted to the ATEX 95 forced air cooling ensures a nearly uniform temperature distribution in the interior, which is explosion-proof and intrinsically safe. The interior can be extended optional.

 Labex® 520

Capacity 700 l
Temperature setting (approx.) +2 to +20 °C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power draft 230 Watts
Average consumption 2,1 KW / 24 h
Overall dimensions (incl. distance from wall) 77 x 98 x 193-196 (w x d x h in cm)
Interior dimensions 62 x 77 x 140 (w x d x h in cm)
Usable dimensions 60 x 66 x 127 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 165 (w x d in cm)
Shelf dimensions 59 x 65 (w x d in cm)
Max. loading capacity per drawer/shelf 40 kg
Weight 145 kg / 180 kg (net / gross)

Read more...

  • Re-circulating air cooling compliant with ATEX 95
  • 5 shelves, height-adjustable
  • Explosion proof interior (LABEX®-Intrinsic Safety)
  • ATEX- 94/9/EG conformity TÜV certified
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Safety device to prevent freezing
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Low-noise compressor

Laboratory freezers

KIRSCH Laboratory Freezers stand out particularly thanks to their thick housing insulation made of high-quality, pressure-foamed material. Our LABEX models are explosion proof and fulfill the ATEX 94/9/EC guideline. The storage temperature can be adjusted between -5 °C and -30 °C depending on the model.

BASIC MODEL WITHOUT EXPLOSION-PROOF INTERIOR
Maximized temperature stability and a thick housing insulation made of high-quality, pressure-foamed material. Each laboratory freezer guarantees a safe storage for your sensitive goods.

FROSTER-LABO-330

This laboratory freezer FROSTER-LABO-330 features re-circulating air cooling, a rapid defrosting system and a quick-freeze function. 4 plastic-coated shelves on mountings are fitted as standard. The shelves can optionally rest on support rails. Besides this standard option wire baskets on runners are also available.

 Froster Labo 330

Capacity 300 l
Temperature setting (approx.) -5 to -30 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 540 Watts
Average consumption 4,58 KW / 24 h
Overall dimensions (incl. distance from wall) 74 x 77 x 159 (w x d x h in cm)
Interior dimensions 59,5 x 53 x 95 (w x d x h in cm)
Usable dimensions 59,5 x 41 x 95 (w x d x h in cm)
Overall dimensions with door opened at 90° 74 x 141 (w x d in cm)
Shelf dimensions 57 x 42 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 112 kg / 127 kg (net / gross)

Read more...

  • 4 shelves, height-adjustable
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Automatical defrosting and melt water evaporation
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER-LABO-530

The model FROSTER-LABO-530 features re-circulating air cooling, a rapid defrosting system and a quick-freeze function. 5 plastic-coated shelves on mountings are fitted as standard. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well.

 Froster Labo 530

Capacity 500 l
Temperature setting (approx.) -5 to -30 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 640 Watts
Average consumption 7,6 KW / 24 h
Overall dimensions (incl. distance from wall) 77 x 76 x 193-196 (w x d x h in cm)
Interior dimensions 60 x 57 x 140 (w x d x h in cm)
Usable dimensions 60 x 45 x 140 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 144 (w x d in cm)
Shelf dimensions 59,7 x 45 (w x d in cm)
Max. loading capacity per shelf 24 kg / 40 kg
Weight 140 kg / 170 kg (net / gross)

Read more...

  • 5 shelves, height-adjustable
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Automatical defrosting and melt water evaporation
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER-LABO-730

The model FROSTER-LABO-730 has 5 vertically adjustable and plastic coated shelves which rest on mountings. This laboratory freezer can also be fitted with wire baskets and aluminium trays on runners at a surcharge. In case of a power failure the device will output optical and acoustic alarms up to 72 hours.

 Froster Labo 730

Capacity 700 l
Temperature setting (approx.) -5 to -30 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 640 Watts
Average consumption 8,7 KW / 24 h
Overall dimensions (incl. distance from wall) 77 x 97 x 193-196 (w x d x h in cm)
Interior dimensions 60 x 78 x 140 (w x d x h in cm)
Usable dimensions 60 x 65 x 140 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 165 (w x d in cm)
Shelf dimensions 59,7 x 65 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 165 kg / 200 kg (net / gross)

Read more...

  • 5 shelves, height-adjustable
  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Automatical defrosting and melt water evaporation
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door
EXPLOSION-PROOF
TÜV-certified explosion proofness: Our LABEX laboratory freezers fulfill the safety requirements for explosion-proof areas of zone 2 (ATEX 94/9EG) and guarantee that the interior is free of ignition sources.

FROSTER-LABEX-70

This freezer is mainly being used as a built-in device. If the static ventilation is insufficient a refrigeration machine ventilator can optionally be integrated.

 Froster Labex® 70

Capacity 70 l
Temperature setting (approx.) -15 to -22 °C
Voltage 220 - 240 V
Frequeny 50 / 60 Hz
Power draft 100 Watts
Average consumption 1,6 KW / 24 h
Overall dimensions (incl. distance from wall) 47 x 51 x 74 (w x d x h in cm)
Interior dimensions 35 x 38 x 55 (w x d x h in cm)
Usable dimensions (usable depth above 5 cm, below 16 cm less)
Overall dimensions with door opened at 90° 47 x 96 (w x d in cm)
Drawer inner dimensions 29 x 26 x 5 (w x d x h in cm)
Shelf dimensions 20,5 x 35,2 or 31,5 x 35,3 (w x d in cm)
Max. loading capacity per drawer/shelf 9,5 kg / 25 kg
Weight 34 kg / 42 kg (net / gross)

Read more...

  • 4 shelves
  • Explosion proof interior (LABEX®-Standard-Safety)
  • ATEX- 94/9/EG conformity TÜV certified
  • Undercounter type
  • Actual value thermometer
  • Stepless temperature selection
  • Lockable door

FROSTER-LABEX-96

This laboratory freezer can be installed normally as well as in an undercounter installation. The unit features an explosion-proof interior according to the guideline 94/9/EG (ATEX 95). The temperature and defrosting probes are protected by special safety barriers.

 Froster Labex® 96

Capacity 95 l
Temperature setting (approx.) -5 to -25 °C
Voltage 220 - 240 V
Frequeny 50 / 60 Hz
Power draft 160 Watts
Average consumption 2,6 KW / 24 h
Overall dimensions (incl. distance from wall) 54 x 53,5 x 82 (w x d x h in cm)
Interior dimensions 44 x 42 x 47 (w x d x h in cm)
Usable dimensions 42 x 37 x 47 (w x d x h in cm)
Overall dimensions with door opened at 90° 54 x 105,5 (w x d in cm)
Shelf dimensions 43,8 x 36 (w x d in cm)
Max. loading capacity per drawer/shelf 13 kg / 25 kg
Weight 42 kg / 50 kg (net / gross)

Read more...

  • 2 shelves
  • Door frame heating
  • Explosion proof interior (LABEX®-Standard-Safety)
  • ATEX- 94/9/EG conformity TÜV certified
  • Undercounter type
  • Meltwater tray for manual emptying
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Low-noise compressor
  • Lockable door
EXPLOSION PROOF AND RE-CIRCULATING AIR COOLING
We provide you with a maxiumum of explosion proofness and a maxiumum of temperature consistency- thanks to our LABEX® technology and the adapted KIRSCH-re-circulating air cooling (optimized air guide panels). The unique combination of explosion proofness, automatic fast defrosting, controlled decompression and re-circulating air cooling lead to the safest and best storage conditions for your goods.

FROSTER-LABEX-330

This laboratory freezer features re-circulating air cooling, a rapid defrosting system and a quick-freeze function. The unit also features an explosion-proof interior according to the guideline 94/9/EG (ATEX 95). 4 plastic-coated shelves on mountings are fitted as standard. The shelves can optionally rest on telescopic runner. Besides this standard option wire baskets on runners are also available.

 Froster Labex® 330

Capacity 300 l
Temperature setting (approx.) -5 to -30 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 540 Watts
Average consumption 3,98 KW / 24 h
Overall dimensions (incl. distance from wall) 74 x 78 x 159 (w x d x h in cm)
Interior dimensions 59 x 52 x 95 (w x d x h in cm)
Usable dimensions 57 x 42 x 82 (w x d x h in cm)
Overall dimensions with door opened at 90° 74 x 142 (w x d in cm)
Shelf dimensions 57 x 42 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 120 kg / 135 kg (net / gross)

Read more...

  • 4 shelves, height-adjustable
  • Re-circulating air cooling
  • Explosion proof interior (LABEX®-Intrinsic Safety)
  • ATEX- 94/9/EG conformity TÜV certified
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER-LABEX-530

The model FROSTER-LABEX®-530 features re-circulating air cooling, a rapid defrosting system and a quick-freeze function. 5 plastic-coated shelves on mountings are fitted as standard. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well.

 Froster Labex® 530

Capacity 500 l
Temperature setting (approx.) -5 to -30 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 510 Watts
Average consumption 4,7 KW / 24 h
Overall dimensions (incl. distance from wall) 77 x 76 x 193-196 (w x d x h in cm)
Interior dimensions 60 x 57 x 140 (w x d x h in cm)
Usable dimensions 60 x 46 x 127 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 144 (w x d in cm)
Shelf dimensions 59 x 45 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 140 kg / 170 kg (net / gross)

Read more...

  • 5 shelves, height-adjustable
  • Re-circulating air cooling
  • Explosion proof interior (LABEX®-Intrinsic Safety)
  • ATEX- 94/9/EG conformity TÜV certified
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

FROSTER-LABEX-730

The model FROSTER-LABEX®-730 has 5 vertically adjustable and plastic coated shelves which rest on mountings. This laboratory freezer can also be fitted with wire baskets and aluminium trays on runners at a surcharge. In case of a power failure the device will output optical and acoustic alarms up to 72 hours.

 Froster Labex® 730

Capacity 700 l
Temperature setting (approx.) -5 to -30 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power draft 510 Watts
Average consumption 5,7 KW / 24 h
Overall dimensions (incl. distance from wall) 77 x 98 x 193-196 (w x d x h in cm)
Interior dimensions 62 x 77 x 140 (w x d x h in cm)
Usable dimensions 60 x 66 x 127 (w x d x h in cm)
Overall dimensions with door opened at 90° 77 x 166 (w x d in cm)
Shelf dimensions 59 x 65 (w x d in cm)
Max. loading capacity per shelf 40 kg
Weight 165 kg / 200 kg (net / gross)

Read more...

  • 5 shelves, height-adjustable
  • Re-circulating air cooling
  • Explosion proof interior (LABEX®-Intrinsic Safety)
  • ATEX- 94/9/EG conformity TÜV certified
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater tray for manual emptying
  • Rapid freezing cycle
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/maximum temperature memory
  • Optical and acoustical alarm
  • RS-485 interface for computer based temperature documentation
  • Potential free contact for alarm transmission
  • Lockable door

 

Pharmacy Refrigerators

KIRSCH is the market leader for pharmaceutical refrigerators in Germany. Each refrigerator is particularly made to meet the demanding DIN 58345 regulation. Our products are market leading in temperature stability and quality.


The Pro Active line offers, depending on the individual model type, the following features

  • Re-circulating air cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Easy-to-read LED temperature display
  • Automatical defrosting and meltwater evaporation
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Optical and acoustical alarm including power failure alarm
  • Minimum/Maximum temperature memory
  • Safety device to prevent freezing
  • RS485 interface for computer-based temperature documentation
  • Potential free contact for alarm transmission
  • Height-adjustable drawers
  • Individual drawer division with adjustable length and cross dividers.
  • Low-noise compressor
  • Glass doors are available for most models, as well as a decorative installation frame or door coupling fittings.
  • Reduction in power consumption by up to 60%
  • Faster response times in case of impending faults thanks to proactive alerts
  • Data documentation can be read via USB interface with KIRSCH Datanet software
  • Reduction in temperature deviations in the refrigerated compartment
  • Maximum storage safety due to perfectly coordinated components

The Ultimate line offers on top of the Pro-Active line:

  • Touch-Display, elegant glass design
  • Simple operation via a capacitive touch display
  • Access control with a log
  • Graphical display of the temperature curve and min/max temperature
  • Digital data documentation with KIRSCH Datanet software
  • Quick-start
  • Touch operation with laboratory gloves is possible
  • Intuitive help with alarm messages and troubleshooting in plain text

DIN 58345 REGULATION

The "Refrigerators for pharmaceuticals DIN 58345" has been in force since September 2007. Requirements include: lockable door, operating temperature between +2 °C and +8 °C with reference measurement of the model series, acoustic and optical warning in the event of temperature deviation and power failure, safety features preventing temperatures below freezing, potential-free contact for remote warning etc.

MED 100 PRO-ACTIVE

The pharmaceutical refrigerator MED-100 is mainly installed in furniture. The compressor is dynamically ventilated. Air supply and discharge are done via a ventilating grille at the front. This permits an effortless installation (also as an under-counter type). When the device is intended to be used as a stand-alone unit we can optionally supply a work surface.

Also suitable for the storage of vaccines.

 MED 100 PRO ACTIVE

Capacity 95 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 75 Watt
Normal consumption 0,67 KWh / 24 h
Overall dimensions(incl. distance from wall) 54 x 54 x 82 (w x d x h in cm)
Overall dimensions with the door opened at 90° 54 x 105,5 (w x d in cm)
Drawer inner dimensions 40,8 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 43,8 x 33 (w x d in cm)
Max. loading capacity per drawer/shelf 13 kg / 25 kg
Weight 46 kg / 50 kg (net / gross)


(measured values based on Ecool R600a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 3 drawers, 1 shelf, height adjustable
  • Individual drawer division with adjustable length and cross dividers.
  • Undercounter type
  • Warning in case of power failure (optical and acoustic)
  • Recirculating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Melt water evaporation
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety control prevents freezing
  • Optical and acoustical alarm including power failure alarm
  • Potential free contact for alarm transmission
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Low-noise compressor
  • Lockable door

MED 126 PRO-ACTIVE

This pharmaceutical refrigerator can also be installed in furniture.
Also suitable for the storage of vaccines.

 MED 126 PRO ACTIVE

Capacity 120 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 105 Watt
Normal consumption 0,58 KWh / 24 h
Overall dimensions (incl. distance from wall) 54 x 53,5 x 89 (w x d x h in cm)
Interior dimensions 44 x 42 x 67 (w x d x h in cm)
Overall dimensions with door opened at 90° 54 x 105,5 (w x d in cm)
Drawer inner dimensions 40,8 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 43,8 x 33 (w x d in cm)
Max. loading capacity per drawer/shelf 13 kg / 25 kg
Weight 47 kg / 57 kg (net / gross)

(measured values based on Ecool R600a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
    3 drawers, 1 shelf, height adjustable
  • Antifreeze
  • Warning in case of power failure (optical and acoustic)
  • Recirculating air-cooling
  • Automatic defrosting
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Minimum/Maximum temperature memory
  • Safety control prevents freezing
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Low-noise compressor
  • Lockable door

MED 200 PRO-ACTIVE

The pharmaceutical fridge features four plastic drawers and one shelf with support rails as standard equipment. The drawers rest on telescopic runners and have a locking element. Each drawer has 1 adjustable length divider and 6 adjustable cross dividers.
Also suitable for the storage of vaccines.

 MED 200 PRO ACTIVE

Capacity 170 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 155 Watt
Normal consumption 0,76 KWh / 24 h
Overall dimensions (incl. distance from wall) 54 x 54,6 x 122 (w x d x h in cm)
Interior dimensions 43 x 43 x 87 (w x d x h in cm)
Overall dimensions with door opened at 90° 54 x 105 (w x d in cm)
Drawer inner dimensions 38 x 34 x 6 (w x d x h in cm)
Max. loading capacity per drawer 13 kg
Weight 69 kg / 80 kg (net / gross)

(measured values based on Ecool R600a)

  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 4 plastic drawers
  • 1 Shelf with support rails
  • Recirculating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Warning in case of power failure (optical and acoustic)
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Meltwater evaporation
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Safety control prevents freezing
  • Potential free contact for alarm transmission
  • Lockable door

MED 288 PRO-ACTIVE

The pharmaceutical fridge features five vertically adjustable drawers made of plastic as standard equipment. The drawers rest on telescopic runners and have a locking element. Each drawer has 2 adjustable length dividers and 9 adjustable cross dividers.

 MED 288 PRO ACTIVE
 

Capacity 280 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 100 Watt
Normal consumption 0,69 KWh / 24 h
Overall dimensions (incl. distance from wall) 67 x 75 x 124 (W x D x H in cm)
Interior dimensions 53 x 50 x 100 (W x D x H in cm)
Overall dimensions with door opened at 90° 67 x 135 (W x D in cm)
Drawer inner dimensions 50 x 32 x 5,6 (W x D x H in cm)
Max. loading capacity per drawer 16 kg
Weight 75 kg / 88 kg (net / gross)

(measured values based on Ecol R600a)

 
  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors.
  • 5 drawers, height adjustable
  • Individual drawer division with adjustable length and cross dividers.
  • Recirculating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater evaporation
  • Easy-to-read LED temperature display
  • Easy accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety control prevents freezing
  • Optical and acoustical alarm including power failure alarm
  • Potential free contact for alarm transmission
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Lockable door

MED 340 PRO-ACTIVE

The pharmaceutical fridge features 9 vertically adjustable drawers made of plastic as standard equipment. The drawers rest on telescopic runners and have a locking element. Each drawer has 2 adjustable length dividers and 9 adjustable cross dividers.

 MED 340 PRO ACTIVE
 

Capacity 330 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 108 Watt
Normal consumption 0,82 KWh / 24 h
Overall dimensions (incl. distance from wall) 67 x 63,5 x 181 (W x D x H in cm)
Interior dimensions 53 x 45 x 128 (W x D x H in cm)
Overall dimensions with door opened at 90° 67 x 126 (W x D in cm)
Drawer inner dimensions 50 x 32 x 5,6 (W x D x H in cm)
Max. loading capacity per drawer 16 kg
Weight 100 kg / 113 kg (net / gross)

(measured values based on Ecol R600a)

 
  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors.
  • 9 drawers, height adjustable
  • Individual drawer division with adjustable length and cross dividers.
  • Recirculating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater evaporation
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety control prevents freezing
  • Optical and acoustical alarm including power failure alarm
  • Potential free contact for alarm transmission
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Lockable door

MED 468 PRO-ACTIVE

The pharmaceutical fridge features 10 vertically adjustable drawers made of plastic as standard equipment. The drawers rest on telescopic runners and have a locking element. Each drawer has 2 adjustable length dividers and 12 adjustable cross dividers.

 MED 468 PRO ACTIVE
 

Capacity 460 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 190 Watt
Normal consumption 0,91 KWh / 24 h
Overall dimensions (incl. distance from wall) 74 x 79,5 x 181 (W x D x H in cm)
Interior dimensions 60 x 57 x 128 (W x D x H in cm)
Overall dimensions with door opened at 90° 74 x 144 (W x D in cm)
Drawer inner dimensions 57 x 43 x 5,6 (W x D x H in cm)
Max. loading capacity per drawer 24 kg
Weight 130 kg / 143 kg (net / gross)

(measured values based on Ecol R600a)

 
  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors.
  • 10 drawers, height adjustable
  • Individual drawer division with adjustable length and cross dividers.
  • Recirculating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater evaporation
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Microprocessor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety control prevents freezing
  • Optical and acoustical alarm including power failure alarm
  • Potential free contact for alarm transmission
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Lockable door

MED 520 PRO-ACTIVE

The pharmaceutical fridge features 12 vertically adjustable drawers made of plastic as standard equipment. The drawers rest on telescopic runners and have a locking element. Each drawer has 2 adjustable length dividers and 12 adjustable cross dividers.

 MED 520 PRO ACTIVE

Capacity 500 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 260 Watt
Normal consumption 1,5 KWh / 24 h
Overall dimensions (incl. distance from wall) 77 x 76 x 195,5 (W x D x H in cm)
Interior dimensions 60 x 57 x 140 (W x D x H in cm)
Overall dimensions with door opened at 90° 77 x 144 (W x D in cm)
Drawer inner dimensions 57 x 39 x 5,6 (W x D x H in cm)
Max. loading capacity per drawer 24 kg
Weight 120 kg / 147 kg (net / gross)

(measured values based on Ecol R600a)

 
  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors.
  • 12 drawers, height adjustable
  • Castors
  • Individual drawer division with adjustable length and cross dividers.
  • Recirculating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater evaporation
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety control prevents freezing
  • Optical and acoustical alarm including power failure alarm
  • Potential free contact for alarm transmission
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Lockable door

MED 600 PRO-ACTIVE

Due to the special measurements, this pharmaceutical fridge is ideal for complementing pharmacies’ furniture which features long drawers. The drawers have a transparent bottom so you can see at a glimpse what is inside. A decorative door frame for attaching decorative panels is available at a surcharge.

* Picture with 13 drawers

 MED 600 PRO ACTIVE

Capacity 600 l
Temperature setting (approx.) +2 to +15°C
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power consumption 340 Watt
Normal consumption 3,20 KW / 24 h
Overall dimensions (incl. distance from wall) 51 x 100 x 212 - 215 (w x d x h in cm)
Interior dimensions 39 x 90 x 160 (w x d x hin cm)
Usable dimensions 39 x 78 x 160 (w x d x h in cm)
Overall dimensions with pulled out drawers 51 x 164 (w x d in cm)
Drawer inner dimensions (2x) 33 x 33,6 x 7 (w x d x h in cm)
Max. loading capacity per drawer 22 kg
Weight 170 kg / 200 kg (net / gross)

 
  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensor
  • 12 drawers, height adjustable
  • Individual drawer division with adjustable length and cross dividers.
  • Recirculating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater evaporation
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety control prevents freezing
  • Optical and acoustical alarm including power failure alarm
  • Potential free contact for alarm transmission
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Lockable door

MED 720 PRO-ACTIVE

The pharmaceutical fridge features 12 vertically adjustable drawers made of aluminium as standard equipment. The drawers rest on telescopic runners and have a locking element. Each drawer has 2 adjustable length dividers and 9 adjustable cross dividers.

 MED 720 PRO ACTIVE

Capacity 700 l
Temperature setting (approx.) +2 to +15 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 250 Watt
Normal consumption 1,55 KWh / 24 h
Overall dimensions (incl. distance from wall) 77 x 98 x 195,5 (W x D x H in cm)
Interior dimensions 62 x 77 x 140 (W x D x H in cm)
Overall dimensions with door opened at 90° 77 x 165 (W x D in cm)
Drawer inner dimensions 57 x 60 x 6 (W x D x H in cm)
Max. loading capacity per drawer 24 kg
Weight 164 kg / 190 kg (net / gross)


(measured values based on Ecol R600a)

 
 
  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors.
  • 12 aluminium drawers, height adjustable
  • Individual drawer division with adjustable length and cross dividers.
  • Recirculating air-cooling
  • Optimized ventilation plates to minimize interior temperature differences
  • Automatic defrosting
  • Meltwater evaporation
  • Easy-to-read LED temperature display
  • Easily accessible control panel with key switch
  • Micro-processor controlled temperature and thawing regulation to maximize temperature stability
  • Minimum/Maximum temperature memory
  • Safety control prevents freezing
  • Optical and acoustical alarm including power failure alarm
  • Potential free contact for alarm transmission
  • Data documentation can be read via USB interface with KIRSCH Datanet software.
  • Lockable door

Pharmaceutical Freezers
Thanks to their robust design and technical equipment, pharmaceutical freezers from KIRSCH are top-quality products that need an absolute minimum of routine maintenance and are produced by high-volume methods.

Model Specific Features

They stand out particularly thanks to their thick housing insulation made of high-quality, pressure-foamed, environmentally compatible material and guarantee low energy consumption.
Depending on the individual model, the operating temperature is maintained automatically either by an interior thermostat or an electronic micro-processor controlled temperature regulator with digital display, even in the event of changing ambient temperatures.

FROSTER MED 95 PRO-ACTIVE

The Pharmaceutical Freezer FROSTER-MED-95 is being used as an integrated or undercounter type freezer or as a stand-alone model. The compressor is dynamic ventilated. Air supply and discharge is done via a ventilating grille at the front. This permits an effortless installation (also as an undercounter type)

 Froster Med 95 PA

Capacity 95 l
Temperature setting (approx.) -5 to -25 °C
Voltage 220 - 240 V
Frequency 50 Hz
Power consumption 123 Watt
Normal consumption 1,33 KWh / 24 h
Overall dimensions (incl. distance from wall) 54 x 54 x 82 (w x d x h in cm)
Interior dimensions 44 x 42 x 47 (w x d x h in cm)
Overall dimensions with door opened at 90° 54 x 105,5 (w x d in cm)
Drawer inner dimensions 40,8 x 32 x 5,6 (w x d x h in cm)
Shelf dimensions 43,8 x 36 (w x d in cm)
Max. loading capacity per drawer/shelf 13 kg / 25 kg
Weight 50 kg / 54 kg (net / gross)

(measured values based on Ecool R600a)

 
  • PRO-ACTIVE- Control:
    Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
  • 1 drawer and 2 shelves
  • Undercounter type
  • Heated door frame
  • Rapid freezing cycle
  • Digital temperature display
  • Key switch
  • Minimum/Maximum temperature memory
  • Optical and acoustic warning device
  • Potential free contact and interface RS485
  • Low-noise compressor
  • Lockable door